RevoluzionAutomotive
All guides

Fuel system

Fuel system basics: feed, return, regulator and filter order

A simple layout for a carb or EFI conversion, in the order fuel actually travels.

Video walkthrough coming soon

Fuel travels in a fixed order. Building the system in that order makes every other decision easier.

Tank → pre-filter → pump → post-filter → feed line → rail/log → regulator → return line → tank

  • Pre-filter protects the pump. It is usually coarse and often a strainer in the tank.
  • Post-filter protects the injectors — this is the fine one, and it belongs after the pump, not before.
  • Regulator goes after the rail on a return-style system, or at the tank end on a returnless system.
  • Return lines run at low pressure but still carry fuel — treat them as fuel lines, not as vents.

Sizing

AN-6 covers most Malaysian builds comfortably. Move to AN-8 when you are feeding serious power with a large pump, and match the return line to what the regulator can bypass rather than to the feed size.

Next guide

AN fittings explained: what the dash numbers actually mean